Compact ultrasonic flow meter s-flow - FSZ
ref : FSZFrom
1584,00 € DiscoverThis flowmeter is a clamp-on type ultrasonic flowmeter that can measure the volumetric flow rate of a liquid inside a pipe by clamping on from the outside. By making full use of the latest electronic and digital signal processing technologies, this ultrasonic flowmeter is significantly smaller than conventional products. It integrates the flow transmitter and detector, enabling it to eliminate the need for signal cable wiring while facilitating mounting to pipes by adopting a greaseless design.
Flow rate is “visualized” using our long-cultivated Fuji ultrasonic flow meter technologies. Contributes to energy savings and production process solutions.
Carbon neutrality on a global scale has been attracting attention in recent years.
Companies are promoting their activities to achieve high efficiency and energy savings. Against this backdrop, more demand is growing to control the flow rate of fluid at the end points of the production lines in the factories. Fuji Electric has developed the easy-deployable Integral Flowmeter, named “S-FLOW” to support such demand. It has realized easy installation, space savings and affordable cost.
HIGH PRECISION
EASY TO USE
COMPACT AND LIGHTWEIGHT
RESISTANT
By using the ultrasonic pulses transmitted diagonally between the upstream and downstream sensors mounted on the outside of the pipe, the flow rate is measured by detecting the time difference obtained by the flow of fluid.
Type | Pipe diameter | |
FSZ08 | 8A, 10A | |
FSZ15 | 15A, 20A | |
FSZ25 | 25A, 32A |
Pipe materials | Metals (stainless steel, steel, copper), Plastics (PVC, PP, PVDF), etc. |
Fluid types | Water, ultrapure water, chemicals, oil, etc. |
Easy installation using a single screwdriver
Line 1: Instantaneous flow rate value
Line 2: Instantaneous flow rate % value
Line 1: Instantaneous flow rate value
Line 2: Pipe temperature
Flow transmitter and detector functions are integrated to achieve compact dimensions.
Compared to conventional flow transmitter (type : M-Flow FLR ultrasonic flowmeter), the size is reduced by approximately 76%.
Its compact design allows installation in areas where space is limited, such as in densely-spaced piping and inside equipment.
A built-in temperature measurement function, enables simultaneous measurement of flow rate and temperature.
In addition to piping for pure water manufacturing processes, cleaning processes, and equipment cooling, it can also be mounted inside equipment where there is densely-spaced small-diameter piping.
It can be installed to cold and hot water piping throughout the entire building. By measuring the flow rate, it facilitates more efficient fan coil unit (FCU) operations. Similarly, it also facilitates efficient operation of air handling units (AHU) for large spaces. The monitoring of flow rates contributes to energy savings in industrial utilities.
Types and configurations
The S-Flow flowmeter is available in several types depending on the pipe diameter:
Each main unit is configured with an integrated transmitter and flow sensor.
Mounting and measuring method
Using a clamp-on mounting method, the ultrasonic flowmeter offers convenient installation without process interruption. The transit time measurement method guarantees optimum accuracy for homogeneous fluids, where ultrasonic signals can be transmitted efficiently.
Measuring range and accuracy
With a measurement range from 0 to ±5 m/s (minimum 0 to ±0.2 m/s), it guarantees exceptional adaptability. Accuracy is also outstanding:
Pipe materials and thicknesses
The flowmeter is compatible with a variety of pipe materials, including metals (stainless steel, steel, copper) and plastics (PVC, PP, PVDF). Pipe thickness can vary from 1.2 mm to 4.9 mm, ensuring maximum flexibility.
Environmental conditions
The FSZ flowmeter is designed to operate under a wide range of environmental conditions:
Display, Outputs and Options
The flowmeter features a 4-digit 2-line LED display for easy monitoring. Output signals include 4 to 20 mA DC (1-point) and contact (2-point). A pipe surface temperature measurement option is also available.
Power supply and weight
With a power supply of 20 to 27.5 V DC and a power consumption of 2.5 W or less, the S-Flow flowmeter is energy-efficient. Weights vary according to model: FSZ08 (400 g), FSZ15 (500 g), FSZ25 (600 g).