ATEX SIL2 SIL3 industrial pressure transmitters are devices designed for high-risk environments. "ATEX" indicates that they are certified for explosive areas, while "SIL2" and "SIL3" refer to Safety Integrity Levels, with SIL3 being more secure than SIL2. They measure pressure under extreme conditions, while ensuring safety and operational reliability.
Pressure transmitter industrial ATEX SIL2 SIL3 FCX-AIV V6 series
Short delivery times or from stock (French manufacturer pressure transmitter)
The uncompromisingly high-tech industrial pressure transmitter
Fuji Electric's pressure transmitters industrial FCX-AIV V6 series continuously measures fluid pressure, flow, level and density.
The range of pressure measurement instruments is suitable for all types of application: liquid, air, gas and steam.
FCX-AIV V6 industrial digital pressure transmitters are designed to the highest quality standards to guarantee safe, reliable measurements. They offer unrivalled performance for optimized control of your equipment.
With enhanced SIL2 and SIL3 safety features, they measure gauge, differential or absolute pressure and convert it into a directly proportional 4-20 mA output signal.
Digital signal processing by the microprocessor-based electronics unit and its micro-capacitive silicon cell deliver exceptional speed, accuracy and stability.
Whatever your industry, Fuji Electric digital pressure transmitters adapt to your environment and your requirements. From a few milibars to the most extreme pressures, the instruments guarantee the high precision, stability and robustness you expect.
FCX-AIV series explosion proof and Intrinsically Safe pressure transmitter are also designed to operate safely in hazardous environments.
Their wide measuring range offers astonishing flexibility, enabling you to reduce your instrument stocks by reducing the number of part numbers. Their reliability and robustness mean you can continue to operate your installations, even in extreme environments.
Benefits of pressure transmitters digital industrial
Robust construction with high-tech capacitive silicon chip
Operating principle of the capacitive pressure sensor
The silicon sensing element receives a pressure differential that varies two capacitive values.
The siliicum chip is mounted floating in the neck of the measuring cell to obtain high static pressure and temperature characteristics.
Advantages of the industrial pressure transmitter with capacitive cell
Thanks to the silicon membrane of the microcapacitive element, hysteresis is minimised.
The result is excellent stability and reproducibility.
The optimised structure improves the output and long-term stability of your pressure transmitter.
Excellent zero stability
High reliability over time
Resistance to overpressure
Reduction of hysteresis constraints
Reduction of mechanical fatigue
An advanced floating cell
The floating cell protects the pressure transducers from harsh environmental conditions, ensuring long-term stability.
The small size of the cell allows easy handling while providing improved temperature and static pressure.
Water hammer and excessive pressure surges are controlled.
Improve the pressure visibility of your industrial process with an integrated digital indicator
Digital indicator
Fuji Electric's FCX-AIV V6 series pressure transmitters are equipped with digital indicators for pressure measurement. Thanks to the bar graph on the display, the output level can be quickly and intuitively understood in the same way as with an analogue indicator. The simultaneous display in physical magnitude allows precise reading of the measurement. The bargraph function allows you to quickly view your pressure measurement. In the event of an anomaly, the display of an error code on the screen enables users to understand and react quickly to the situation.
Easy, accurate reading of measured pressure
The digital indicator consists of a 2-line, 6-digit LCD display and 3 push-buttons for accurate reading of the measured pressure. It displays the measurement in physical units and allows local configuration of all the pressure transmitter's setting parameters. The push-buttons and digital display provide an intuitive, easy-to-understand interface for configuring the instrument.
On-site pressure transmitter configuration
All the pressure sensor parameters are available via the 3-button digital indicator. You can configure and adjust the data using a magnetic pen and without opening the cover of the indicator.
Main settings available on the pressure sensor indicator
Transmitter scaling without reference pressure
Linear or square-root output signal
Damping
Digital indicator configuration
Pressure measurement units (bar, mbar, Pa, mmCE, etc.)
Pressure scale
Pressure sensor zero calibration
Self-diagnosis
Current generator in the measuring loop
Configuration of the burnout
Easy configuration with digital pressure sensor field tools
FCX-AIV V6 intelligent pressure sensors feature a HART® version 7 communication interface.
Instruments are quickly configured and configurations saved.
Fuji Electric offers a complete set of FDT (Field Device Tool) drivers free of charge for DTM (Device Type Manager) software users.
This allows you to troubleshoot, configure and access full settings using PACTware™ (or another FDT compatible program).
Industrial pressure transmitter with SIL 2 / SIL 3 certification (IEC 61508)
Reduce the probability of failure by integrating fcx-aiv into your safety loop
Thanks to its exceptional SFF, the SIL2/SIL3-certified FCX-AIV pressure sensor is the preferred choice of I&C engineers when the design of a safety function is required.
The implementation of Safety Instrumented Systems in the process industry (IEC 61511) allows risks to be reduced to a targeted and acceptable level and the maintenance strategy to be organised to maintain this level of safety.
With SIL 3 capability, the FCX-AIV V6 is certified as a SIL2 (HFT=0) or SIL 3 (HFT=1) integrated safety system.
It complies with IEC 61508 and IEC 61511 standards.
The high level of safety of the AIV V6 pressure transmitter is guaranteed by its SFF (Safety Failure Fraction) rate of over 92.3%.
The SFF of the pressure transmitter is defined as the ratio: [Average rate of failures detected (safe and dangerous) + not detected (safe) ] / Total average rate of failures experienced.
Pressure transmitter ATEX explosion-proof and intrinsically safe
FCX-AIV explosion-proof pressure transmitters are specifically designed to operate safely in hazardous environments where there is a risk of explosions due to the presence of flammable gases, vapors, or combustible dust such as mines, chemical plants and oil refineries.
The explosion proof pressure transducers are certified in accordance with IECE standards(International). They meet strict requirements for ignition protection and can be safely installed in environments with potentially explosive atmospheres.
FCX-AIV Intrinsically safe pressure transmitters are designed for use in environments where there is a high risk of ignition but demand a higher level of safety than explosion-proof devices. These devices have undergone rigorous testing and are suitable for use in hazardous areas
Fuji Electric's ATEX explosion-proof and intrinsically safe pressure transmitters guarantee safe and reliable pressure measurement in industries with potentially explosive atmospheres.
Approvals for hazardous areas
Compliance
High precision pressure transmitter for any industrial environment
The performance of the processor and the optimisation algorithm correct the pressure for external variations in real time.
Thanks to its unique Giration 4DTM technology, choosing the FCX-AIV is your guarantee of precise, repeatable measurements, whatever the conditions of your process and environment.
Ultra-fast response time
The FCX-AIV V6 pressure transmitter has a measurement cycle of 40 ms. This unique performance makes it the fastest pressure transmitter on the market.
Smart presure transmitter for IOT application : numerous communication protocols like HART
The FCX-AIV V6 pressure sensor is an intelligent sensor (SMART). The communications protocols available enable it to integrate and ensure compatibility with existing systems.
Predictive maintenance for pressure transmitters: maintenance function and fault detection
The pressure sensor has built-in diagnostic functions to detect the causes of faults and take appropriate corrective action.
Predictive maintenance functions :
Factory calibration parameters are stored in the transmitter's memory.
It is possible to return to the original parameters at any time.
The minimum and maximum operating temperatures are stored and can be consulted in the maintenance menu via the display or a portable terminal.
You can quickly identify the causes of equipment failure.
Access to all the pressure transmitter setting parameters can be secured by a password.
You can ensure the safety of your equipment.
Fault detection functions :
The output signal complies with NAMUR NE43 recommendations. Fault detection is facilitated.
A wide choice of noble materials for your industrial pressure transmitter
The AIV V6 series pressure transmitters are available in noble materials adapted to your fluids, for use in the most aggressive processes. They are protected against corrosion and chemical attack.
In addition to 316L stainless steel, the parts in contact with the fluid, such as the measuring diaphragms, are available in a range of materials including Hastelloy C, Tantalum and Monel.
Various materials and coatings are available for the metal diaphragms of pressure transmitters to guarantee the longevity and reliability of your measurements.
Membrane materials
Applications
Gold and ceramic coating
Sulphur reduction installations, hydrogen production units, oil refineries and putrefaction mud treatment works, ionised gas (hydrogen sulphide)
Tantalum
Hydrochloric acid, sulphuric acid, nitric acid, aqua regia
Titanium
Organic acid, inorganic acid, alkaline type, sea water
Hastelloy-C
Organic acid, inorganic acid, alkaline type, sea water
Monel
Alkaline type, fluorinated acid
Zirconium
Hydrochloric acid, caustic soda, whitening agent
The pressure transmitters industrial FCX-AIV V6 series: the solution for your pressure, flow, level and density measurements!
Discover Fuji Electric's pressure transmitter industrial ATEX SIL2 SIL3, a pressure measurement solution for the most demanding environments. Designed to meet stringent safety standards, our transmitter combines performance and reliability, guaranteeing unrivalled accuracy even in hazardous areas.
For seamless integration and optimum risk management, choose safety with the ATEX SIL2 SIL3 Pressure Sensor.
Fuji Electric's expertise and service is your safety asset!
